54
12.2 Operation
The Web page follows a tree-structured design. The operational methods are
basically the same as the console and Telnet modes. Getting familiar with the
console and Telnet is helpful and makes it easier to learn to configure through the
Web browser.
The Web configuration uses a step-by-step method for configuring the device.
On-screen explanations of each function or parameter are provided to help the
operators to know what is being done and what can be processed next.
The buttons in the table below are used during configuration.
Item Button Function
1
Next
To go to the next step or page
2
Back
To return to the previous page
3
Reset
If the parameters are changed, click this button to restore
the original parameters
4
Cancel
To stop and quit the current page without changing any
setting
5
Finish
To submit the setting, or when a status table is finished
reading, click this button to exit the page
6
OK
To confirm the setting when a parameter is inserted or
changed
7
Modify
To modify the parameters
8
Add
To add an item to a list, such as a MAC entry or a static
route entry. Click the
Add
button after inserting the
required parameters. Click
Finish
when the “ADD” action
is completed
