7.4 Security
To display the Security function, you need to enable the firewall feature in the
WAN Setup.
7.4.1 IP
Filtering
IP filtering allows you to create a filter rule to identify outgoing/incoming IP traffic
by specifying a new filter name and at least one condition below. All of the
specified conditions in this filter rule must be satisfied for the rule to take effect.
Click 'Save/Apply' to save and activate the filter.
Outgoing
Note: The default setting for all Outgoing traffic is Accepted.
To add a filtering rule, simply click the Add button. The following screen will be
displayed.
- -
46