16
3.3 Login Procedure
Perform the following steps to login to the web user interface.
NOTE:
The default settings can be found in section
STEP 1:
Start the Internet browser and
enter the default IP address for the device
in the Web address field. For example, if the default IP address is
192.168.1.1, type
http://192.168.1.1.
NOTE:
For
local administration (i.e. LAN access), the PC running the browser
must be attached to the Ethernet, and not necessarily to the device.
For remote access (i.e. WAN), use the IP address shown on the
screen and login with remote username and password.
STEP 2:
A dialog box will appear, such as the one below. Enter the default
username and password, as defined in section
Click
OK
to continue.
NOTE:
The login password can be changed later (see section
Summary of Contents for NexusLink 3120
