6
The AC900 Long Range 802.11ac Outdoor AP/CPE features a
range of powerful functions:
802.11ac high-speed wireless technology
16 SSIDs for management
SNMP v1/v2c/v3
Your access point can be up and running in just a few minutes. It
can function as a standalone access point (AP mode), as part of
an AP array (Managed AP mode), or as a client bridge for WISP
last-mile services (Client Bridge mode).
II-1. Initial Setup
Do not connect a non-PoE device to the access point’s
LAN2 (PoE-OUT) port. The LAN2 port outputs 48V and can
damage a non PoE device.
1.
Connect the access point’s LAN1 (PoE-IN) port to the PoE
injector’s PoE port via Ethernet cable.
2.
Connect the PoE injector to a power source using the included
power adapter (DC IN 48/0.4A). Wait a moment for the access
point to start up. The access point is ready when the Power LED
is
blue
.
3.
Use an Ethernet cable to connect the PoE injector’s LAN port to
your network: router or switch. If it’s more convenient for initial
setup, you can connect a computer directly to the access
point’s LAN2 port instead.
II
Quick Setup
