8
The next steps will help you to configure the following basic
settings of the access point:
LAN IP Address
5GHz SSID & Security
Administrator Name & Password
Time & Date
It is recommended you configure these settings before
using the access point.
1.
To change the access point’s LAN IP address, go to
“Network
Settings” > “LAN-side IP Address”
and you will see the screen
below.
2.
Enter the IP address settings you wish to use for your access
point. You can use a dynamic (DHCP) or static IP address,
depending on your network environment. Click “Apply” to save
the changes and wait a few moments for the access point to
reload.
When you change your access point’s IP address, you
need to use the new IP address to access the browser
based configuration interface instead of the default IP
192.168.2.2
