background image

34

COMUNELLO

  ®Copyright 2016 - All rights reserved

DIAGNOSTICS

Photocell Test:

The control unit is prearranged for connection of safety devices in 
compliance with standard EN 12453 point 5.1.1.6. At each operating 
cycle, a functional test of the connected photocell is performed. In the case 
of an open circuit and/or malfunctioning of the photocell, the control unit 
does not enable movement of the barrier and visually signals the test failed 
condition by causing all the indicator LEDs to blink simultaneously. As soon 
as correct operation of the photocell is restored, the control unit is ready for 
normal use. This operating mode guarantees fault monitoring in compliance 
with EN 954-1 Category 2.

WARRANTY

Fratelli Comunello SpA provides a warranty for 24 months for the correct 
functioning of the actuators from the date of manufacture, provided that the 
performance specications indicated in the product instruction manuals are 
respected. Free of charge repair and replacement of components that are 
found to be faulty according to the indisputable judgment of the company’s 
technical staff shall be guaranteed at the sole discretion of Fratelli Comunello 
Spa, and so excluding any claim for damages made by others. Warranty 
material shall be returned to Fratelli Comunello S.p.a. headquarters carriage 
paid and will then be shipped to the customer carriage unpaid. The material 
found to be faulty and returned to Fratelli Comunello S.p.a. shall remain 
property of the Seller. Any cost resulting from any work needed to repair 
the defect or to replace the material shall be charged to the Buyer. No 
compensation shall be allowed for the period of device inactivity. Work under 
warranty does not prolong the warranty period. The defect of the product 
shall be reported by the Buyer within 8 (eight) days from its discovery or 
from the date of delivery of the goods, under penalty of invalidation of the 
warranty. Such claim shall be notied in writing.
Warranty does not cover:
Any product defect or damage that may have been incurred during 
transport; any defect or damage arising from any fault and/or from neglect, 
inadequacy and misuse of the electrical wiring in the Buyer’s property; any 
defect or damage caused by any repairs carried out by non authorised 
personnel or by incorrect use/installation (with reference to this, system 
maintenance is recommended every 6 months) or if not original spare parts 
are used; any defect caused by chemicals or atmospheric conditions. The 
warranty does not cover any cost neither for consumable materials nor for 
alleged defects or convenient surveys.
Product Features Fratelli Comunello SpA products are subjected to 
continue changes and improvements; their technical features and image 
may therefore change without previous notice.
Competent court
Since the contract of sale is confirmed by an Order Confirmation drawn up 
in Rosà, any such dispute shall be settled by the laws of Italy and by the 
court of Vicenza (VI).

Summary of Contents for LIMIT 500









































































Reviews: