®
©2010 Conair Australia Pty Ltd, Suites 20 & 21,
7 Narabang Way, Belrose NSW 2085 Australia
Customer Service Hotline (Australia): 1800 650 263
Customer Service e-mail: aus_info@conair.com
Conair New Zealand Limited, PO Box 251159,
Pakuranga , Auckland 1706 New Zealand
Customer Service Hotline (New Zealand): 0800 266 247
Body Benefits is a registered trademark of Conair Corporation
Model CGP1A
IB-7400
SALON SPA COLLECTION
Use and Care Guide
For your safety and continued enjoyment of this product,
always read the instruction booklet carefully before using.
Model CGP1A
Instructions for using Batteries
• Always purchase the correct size and grade of battery most suitable for the
intended use.
• Replace old batteries of a set at the same time.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel cadmium) batteries.
• Clean the battery compartment by blowing away any debris and also those of
the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended
period of time.
• Remove batteries promptly.
How to use your Neck Massager
1. Locate the zip on the top of the neck massager. Undo the zip and remove the
battery compartment from the neck massager. Be careful not to pull on the
battery compartment as it is connected to the inside of the neck massager.
2. To remove the battery compartment cover, lift the plastic lip and pull the cover
away from the battery compartment.
3. Insert 2xAA alkaline batteries as indicated by the markings inside the
compartment.
4. Ensure the batteries are fixed in place, then replace the cover by lining up the
plastic with the opening at the bottom of the battery compartment.
5. Place the battery compartment back inside the neck massager and secure by
re-zipping.
6. Place the neck massager around your neck and locate the on/off button.
7. Press the on/off button once to turn on the massaging motor.
8. After your neck massage, turn the massager off by pressing the on/off switch
again.
Recommended Massaging Times
Generally, the neck massager should not be used for more than 10-15 minutes
at any one time. Treatment may be applied once or twice daily as desired. You
should adjust your massage time to suit your needs and personal comfort. If
you have any concerns regarding treatment, we recommend consulting your
physician.
User Maintenance
1. Ensure that the neck massager is switched off and batteries are removed
before cleaning.
2. To clean the neck massager, wipe with a clean damp cloth and dry in shade
away from direct heat and sunlight.
3. If fur and debris has built up on the neck massager, vacuum regularly using low
suction.
• DO NOT REMOVE COVERS FOR CLEANING
• DO NOT WASH
• DO NOT DRY CLEAN
• DO NOT USE SOLVENTS OR CLEANING FLUID
• AVOID HARD RUBBING OR SCRUBBING
• PROTECT FROM DIRECT SUNLIGHT, DIRECT HEAT AND WEATHER.
MANICURE & PEDICURE SET
Use the 8 piece manicure and pedicure set for a professional, salon finish.
Instructions for using Batteries
• Always purchase the correct size and grade of battery most suitable for the
intended use.
• Replace old batteries of a set at the same time.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel cadmium) batteries.
• Clean the battery compartment by blowing away any debris and also those of the
device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period
of time.
• Remove batteries promptly.
How to use your Manicure and Pedicure Set
1. Locate the battery compartment cover on the top of the power handle.
2. Remove the cover and place aside.
3. Insert 2x AAA alkaline batteries as indicated by the markings inside the
compartment.
4. Ensure the batteries are fixed in place, then replace the cover by sliding over the
battery compartment.
5. The rotary head and the power handle are independent of each other.
6. To attach discs to the rotary head, insert metal post into the white plastic tube
opening on the head of the power handle, then gently push down. To remove the
attachments, simply pull off.
For best results
1. Soak your nails in warm soapy water, then dry thoroughly.
2. Using the cuticle pusher, gently push cuticles back. If desired, massage lotion or
cream into the cuticles to help soften them and promote healthy nails.
3. Install the desired attachment:
a. use the
shaping cones
to shape nails and eliminate ragged edges
b. use the
abrasive buffing discs
to buff hard nails
c. use the
buffing discs
to buff soft nails
d. use the
felt buffing disc
to gently and carefully polish the ridges and furrows
that may be present on the nail’s surface, using short intermittent strokes. This
is not recommended more than once every eight weeks.
4. Slide switch to ‘On’ position to start manicure/pedicure.
5. Finish your manicure/pedicure by applying moisturizing lotion or cream.
User Maintenance
The manicure and pedicure set is designed for household use and is virtually
maintenance free. No lubrication is needed. If cleaning is necessary, wipe with a
clean damp cloth.
Limited One Year Warranty
Conair Australia Pty Ltd. will repair or replace (at our option) your appliance free of
charge for twelve months from the date of purchase if the appliance is defective in
workmanship or materials. This warranty is an additional benefit and does not affect
your legal rights. To obtain service under this warranty, please fill in and return the
Warranty Registration as instructed.
Zippered storage pouch
Cuticle pusher
Felt buffing disc
Coarse buffing disc
Fine abrasive buffing disc
Small shaping cone
Large shaping cone
Fine buffing disc
Coarse abrasive buffing disc
