background image

®

WARNING:

IF YOU THINK THE 

POWER IS OFF WHEN 

THE SWITCH IS OFF

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are 
a dangerous combination. But did you know 
that an electric appliance is still electrically 
live even if the switch is off? If the plug is in, 
the power is on. So when you are not using 
your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

.

USER

MAINTENANCE

Your straightening iron is virtually maintenance-
free. No lubrication is needed. Keep all vents 
and openings clear of dirt and dust. If cleaning 
becomes necessary, disconnect the unit from 
the power source, allow to cool and wipe 
exterior with a cloth. If any abnormal condition 
occurs, unplug the unit, allow it to cool, and 
return it for repair to an authorized service 
representative only. No repairs should be 
attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be 
pulled, twisted, or severely bent. Never wrap 
the cord tightly around the appliance. Damage 
will occur at the high flex point of entry into the 
appliance, causing it to rupture and short circuit. 
Inspect the cord frequently for damage. Stop use 
immediately if damage is visible or if unit stops 
or operates intermittently.

STORAGE

When not in use, your appliance is easy to 
store. Allow appliance to cool, then simply 
store out of reach of children in a safe, dry 
location. 

Do not jerk or strain cord at plug 

connections.

 Do not wrap the line cord 

around the appliance. Allow the cord to hang 
or lie loose and straight at the point of entry 
into the appliance.

Service Center

Conair Corporation
Service Department 

 

7475 N. Glen Harbor Blvd.
Glendale, AZ 85307

For information on any Conair or Infiniti by Conair 
product call 1-800-3-CONAIR or visit us on the web 
at: www.conair.com/infiniti

©2006 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307

06PC2080

IB-6779

TURNS CURLS INTO 

SMOOTH HAIR IN SECONDS

LIMITED FIVE-YEAR WARRANTY

Conair will repair or replace (at our option) 
your unit free of charge for 60 months from 
the date of purchase if the appliance is 
defective in workmanship or materials.
To obtain service under this warranty, return 
the defective product to the service center 
listed below, together with your purchase 
receipt and $3.00 for postage and handling. 
California residents need only provide proof 
of purchase and should call 1-800-3-CONAIR 
for shipping instructions. In the absence of a 
purchase receipt, the warranty period shall 
be 5 years from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, 
OR LIABILITIES, INCLUDING BUT NOT 
LIMITED TO THE IMPLIED WARRANTY OF 
MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE, SHALL BE LIMITED 
IN DURATION TO THE 60-MONTH DURATION 
OF THIS WRITTEN, LIMITED WARRANTY.

 

SOME STATES DO NOT ALLOW LIMITATIONS 
ON HOW LONG AN IMPLIED WARRANTY 
LASTS, SO THE ABOVE LIMITATIONS MAY NOT 
APPLY TO YOU.

IN NO EVENT SHALL CONAIR BE LIABLE 
FOR ANY SPECIAL, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES FOR BREACH 
OF THIS OR ANY OTHER WARRANTY, 
EXPRESS OR IMPLIED, WHATSOEVER. 

Some 

states do not allow the exclusion or limitation 
of special, incidental, or consequential dam-
ages, so the above limitation may not apply 
to you.
This warranty gives you specific legal rights, 
and you may also have other rights, which 
vary from state to state.

GET TO KNOW YOUR 

STRAIGHTENING IRON

Before

After

Instant heat 
technology

Ceramic heater

BONUS 

Heat Shield 

Storage Pouch

5 ultra-high 
heat levels 
with LED 
temperature 
displays

Auto off

Uniform heat 
recovery system

Ultra-slim
Design

Stainless 
steel finish

100% pure ceramic plates

For your safety 
and continued 
enjoyment of this 
product, always 
read the instruction 
book carefully 
before using.

Model CS32

Instruction & Styling Guide

P R O F E S S I O N A L

Solid Ceramic

2" Straightener

06PC2080_cs32_IB.indd   2

06PC2080_cs32_IB.indd   2

5/19/06   10:00:19 AM

5/19/06   10:00:19 AM

Reviews: