inStrUctiOnS FOr USe
How to Operate
1. Check to make sure your scale is set to measure in “lb”. (lb/kg switch on
back of scale should be set to “lb”. If scale does not have a switch, it is
automatically set to measure in “lb”.)
2. Place the scale on an even, flat surface for accurate operation and safety.
3. Quickly and firmly tap center of scale platform with foot to activate
digital display.
4. When “000.0”or “00.0”or “0.0” appears in display window, step onto scale.
DO NOT STEP ONTO SCALE UNTIL “000.0”/“00.0”/“0.0” APPEARS IN
WINDOW.
5. Stand on platform without shifting or moving until weight is displayed
(4 - 5 seconds).
NOTE: Digital display automatically turns off after several seconds.
Helpful Hints
Your Thinner
®
scale is a precise measuring instrument that is most accurate
when weighing a stationary object. To ensure the most accurate readings always
try to stand on the same area of the scale platform and
DO NOT MOVE
. Should
the weight on the scale exceed the scale’s capacity, you may see an error
message ”ERR”.
Electronic sensors are sensitive. Be careful not to drop or jar the scale. Place it
gently onto floor surface, and store where it will be protected from impact.
The scale is an electronic instrument and should never be submerged in water.
Clean with damp cloth only.
In the unlikely event that the scale battery malfunctions and needs to be
replaced, open the battery cover on the bottom of the scale and replace the
old battery with a new one. Properly dispose of the old battery. Do not attempt
to open the scale or to remove any components. Servicing should be done by
qualified technicians only. See warranty information below.
