Facts You Should Know
Your Thinner
®
scale is a precise measuring instrument that is most accurate
when weighing a stationary object. To ensure readings that are 99% accurate,
always try to stand on the same area of the scale platform and DO NOT MOVE.
Should the weight on the scale exceed the scale’s capacity, you may see an
error message ”ERR”.
Electronic sensors are sensitive. Be careful not to drop or jar the scale. Place it
gently onto floor surface, and store where it will be protected from impact.
The scale is an electronic instrument and should never be submerged in water.
Clean with damp cloth and/or glass cleaner.
If scale battery needs to be replaced, lift the battery cover on the bottom of
the scale and replace the old batteries with 4 new AAA alkaline batteries. Do
not mix old and new batteries.
Dispose of the old batteries properly. Do not
attempt to open the scale or to remove any components. Servicing should
be done by qualified technicians only. See warranty information below.
This product is designed to assist you in living a healthy life. However, this is not
intended as a substitute for professional medical advice, diagnosis or treatment.
LIMITeD Ten YeAR WARRAnTY
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed below that is nearest you, together with your sales slip and $5.00
for postage and handling. California residents need only provide proof of
purchase and should call 1-800-3-CONAIR for shipping instructions. In the
absence of a receipt, the warranty period shall be 120 months from the date
of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION
TO THE 120 MONTH DURATION OF THIS WARRANTY.
Some states do not
allow limitations on how long an implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow
the exclusion or limitation of special, incidental, or consequential damages, so
the above limitation may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Your personal data has now been entered and stored. User height, age and
gender will display for a few seconds, to confirm the programming. If any of
these data points were set incorrectly, just go through the customization steps
(1–3) again. The scale is now ready for you to weigh yourself and read body fat,
body water, BMI, and bone mass measurements.
Using Your Thinner
®
Body Fat Monitor
Precautions for Use
CAUTION! Use of this device by persons with any electrical implant such as
a heart pacemaker, or by pregnant women, is not recommended.
1. Quickly and firmly tap center of scale platform with foot to activate
digital display.
2. Wait for "0.0" to appear in display window.
3. Press the USER button located below the display several times until your
user number appears. Note: The scale will automatically scroll through your
customized data, then "0.0" will be displayed.
4. Step onto the scale BAREFOOT, with your feet aligned on the electrodes on
the two sides of the platform.
5. Weight will be displayed for a few seconds. Remain on scale without moving!
6. Display will show your weight on
the top line, body fat % on the
second line and body water % on
the bottom line.
7. After a few seconds, the second
line will display your body mass
index (BMI) and the bottom line
will show your bone mass. Your
weight stays displayed on the
top line.
8. Display will turn off.
Using The Weight-Only Mode
For weight-only mode, no personal data entry is necessary.
1. Place scale on a flat, level surface.
2. Quickly and firmly tap center of scale platform with foot to activate.
3. Wait for "0.0" to appear in display window.
4. Step onto scale. Weight measurement will appear in display window.
InSTRUCTIOnS FOR USe
Before Using Scale
1. Set switch on the back of the scale to measure in kg (kilograms) or lb
(pounds).
2. Set scale on floor. Surface must be level for accurate operation and safety.
Customizing Your
Thinner
®
Body Analysis Monitor
Setting Data for Body Fat/Hydration/Bone Mass Measurement
1. Quickly and firmly tap center of scale platform with foot to activate
digital display.
2. Wait for "0.0" to appear in display window.
3. Press SET button. The scale is now ready to input your
personal data.
Enter User Number
• "P-01" will flash in display window.
• Press UP or DOWN button to select your individual
user number (four user numbers available: P-01
through P-4).
• When selected user number appears in display,
press SET button to save user number.
• The scale is now ready for you to enter your height.
Set Height
• "Ht" (height) will flash in display window.
• Press UP or DOWN button to scroll to your
height measurement.
• Press SET button to save height.
• The scale is now ready for you to enter your age.
Set Age
• "Age" will flash in display window.
• Press UP or DOWN button to scroll to your age.
Press and hold button to advance numbers more quickly.
• Press SET button to save age.
• The scale is now ready for you to enter your gender.
Set Gender
• A gender icon will flash in display window.
• Press UP or DOWN button to select male or
female icon.
• Press SET button to save gender.
This comprehensive digital scale provides all the information you need to
manage your weight and monitor important body analysis functions – all with
the touch of your toes! It measures weight, body fat, body hydration level,
body mass index (BMI), and bone mass with precision accuracy, and can be
programmed for the entire family (up to 4 users). Simple to use, with a large
and easy-to-read digital LCD screen, it’s the ultimate home scale for healthy
weight management.
Body Fat Percentage – What Does It Mean?
Simply speaking, your body is made up of lean mass and fat mass. Lean mass
consists of muscle, bones, organs, etc. Fat mass is body fat. While everyone
needs a certain amount of fat to assist the body in storing energy, providing
heat insulation and other functions, most people will find they are at their most
fit when they increase their lean mass and decrease their fat mass.
While standard scales are useful in providing a measurement of overall
weight, they do not calculate the percentage of fat within the body. However,
this Thinner
®
Body Analysis Monitor allows the user to check both of these
important measurements.
Body Fat Percentage – How is it Measured?
The Thinner
®
Body Analysis Monitor uses a technique called Bioelectric
Impedance Analysis (BIA). A harmless amount of a bioelectric current is sent
from the footpads through the body. This current travels at different speeds
through lean and fat body masses. The scale’s microprocessor analyzes the
degree of impedance, or transmission speed.
Taking into consideration the user’s height, age, gender and weight, the
Thinner
®
Body Analysis Monitor calculates the composition of the body. The
percentage of the body that is composed of fat is displayed on the monitor
– “body fat percentage.”
Body Fat Levels – Recommended Ranges
Men
age excellent
good
moderate
overweight
obese
<19
12.0
12.1 to 17.0 17.1 to 22.0
22.1 to 27.0
>27.1
20-29
13.0
13.1 to 18.0 18.1 to 23.0
23.1 to 28.0
>28.1
30-39
14.0
14.1 to 19.0 19.1 to 24.0
24.1 to 29.0
>29.1
40-49
15.0
15.1 to 20.0 20.1 to 25.0
25.1 to 30.0
>30.1
> 50
16.0
16.1 to 21.0 21.1 to 26.0
26.1 to 31.0
>31.1
08AD027 TH404 IB mech.indd 5-8
3/31/08 1:31:20 PM
