Conair VRU, User Manual

6-2

   I

Troubleshooting

Before Beginning

You can avoid most problems by following the recommended installation, operation and 
maintenance procedures outlined in this User Guide.  If you have a problem, this section 
will help you determine the cause and tell you how to fix it.

Before you begin troubleshooting:

r

Find any wiring, parts, and assembly diagrams that were shipped with your 
equipment.

  These are the best reference for correcting a problem.  The diagrams 

will note any custom features or options not covered in this User Guide.

r

Verify that you have all instructional materials related to the W Series Dryer.

Additional details about troubleshooting and repairing specific components are found 
in these materials.

r

Check that you have manual for other equipment connected in the system.

Troubleshooting may require investigating other equipment attached to, or connected 
with the control.

A Few Words of Caution

WARNING: Improper installation, operation or   

servicing may result in equipment damage or   

personal injury.

This equipment should only be installed, adjusted, and serviced by qualified tech-
nical personnel who are familiar with the construction, operation, and potential 
hazards of this type of machine.

All wiring, disconnects, and fuses should be installed and adjusted by qualified 
electrical technicians in accordance with electrical codes in your region.  Always 
maintain a safe ground.  Do not operate the equipment at power levels other than 
what is specified on the machine serial tag and data plate.