Before Using Scale
Precautions for Use
CAUTION! Use of this device by persons with any electrical implant such
as a heart pacemaker, or by pregnant women, is not recommended.
Please consult your physician should you have any questions about the
use of this product in relation to any condition you may have, or treatment
you may be receiving.
1. Set switch on the base of the scale to measure in pounds (lb) or kilograms (kg).
2. Set scale on floor. Surface must be level for accurate operation and safety.
Using the Weight Only Mode
Instructions for customizing your Weight Watchers Body Analysis and Weight
Tracker are below. However, the scale does not need to be programmed to operate
as a simple weigh scale.
1. Tap the scale with your foot to turn it on. The display will light up.
2. Wait until all digits light for several seconds and “0.0” appears.
3. Step on the scale and stand still to measure your weight.
4. The weight reading stays lit for several seconds. Then the scale will shut
off automatically.
Customizing Your Weight Tracker and
Body Analysis Monitor
This tracking scale can be customized for up to 10 users. While the customization
process is not difficult, it may be easiest to read all the instructions first to familiarize
yourself with them. Then keep the instruction manual handy as you go through the
process step by step.
Buttons: USER, SET, Up and Down arrows
1. To set your user data
Tap the scale to turn it on and wait until "0.0" appears.
