Customizing Your Body Analysis Monitor
This scale can be customized for up to 4 users. While the customization process is
not difficult, it may be easiest to read all the instructions first to familiarize yourself
with them. Then keep the instruction manual handy as you go through the process
step by step.
Buttons: USER, SET, Up and Down arrows
1. To set your user data
Tap the scale quickly and sharply to turn it on and wait until "0.0" appears.
2. Setting the user number
Press the Set button. The number “P-01” will appear and blink. Use the Up or
Down arrow to select a user number (P-01 to P-04). Press SET to confirm.
3. Setting the height
Next, the inch or cm symbol light up (if switch is set to lb, default is height in inches;
if switch is set to KG, default is height in cm). Press the up or down arrows to adjust
the height. Pressing and holding either the up or the down arrow will advance
numbers quickly. Press SET to accept the height. Scale enters the age setting mode.
4. Setting the age
“AGE” appears and the default age 25 flashes. Press the up or down arrows to
adjust the age and press SET to confirm. The scale enters the gender setting mode.
