RF RGBW Remote Controller
09.2839W.042302
Operation
Pair with RF receivers:
Click
“RF Code Key”
on RF receiver
Function introduction
Important:
Read All Instructions Prior to Installation
Output
RF signal
Operation Frequency
868/915/434MHz
Operating temperature
0-40°C
Relative humidity
8% to 80%
Dimensions
120x48x17.6mm
Front side
Back side
•
Control 1 zone of RF receiver
• RGBW color controller
• Compatible with universal serie RF receiver
• 1 receiver can be paired by max 8 different remote controls.
• Waterproof grade: IP20
Product Data
Safety & Warnings
Power Supply
4.5V(3xAAA battery)
LED lights connected with the
RF receiver will flicker once
Click to switch on/off green channel
Press and hold down to increase/
decrease light intensity
Click to turn ON/OFF
The receiver is paired with
the remote successfully.
Turn on
the remote
Touch the
color wheel
How to delete the pairing:
Press and hold down
on the receiver for over 3 seconds until connected LED lights flicker twice,
which means the pairing is deleted successfully.
“RF Code Key”
If you use multiple receivers, you can have all the receivers in the same zone
Learning
Key
RF LED Receiver
1 Zone
RF remote
Learning
Key
RF LED Receiver
Switch warm white, natural white,
cool white.(Through the three RGB
color mixing)
Color wheel, touch to select color
Click to switch on/off white channel
Press and hold down to increase/
decrease light intensity
Press and hold down to save color,
click to recall the saved
Click to switch on/off red channel
Press and hold down to increase/
decrease light intensity
Click to switch on/off blue channel
Press and hold down to increase/
decrease light intensity
Click to play/pause 10 built-in modes,
press and hold down to speed up/
down the running mode
Press and hold down to increase/
decrease all lights intensity
LED indicator
4.5V(3xAAA battery)
R
G
B
W
S2
S1
•
This device contains AAA batteries that shall be stored and disposed properly.
•
DO NOT expose the device to moisture.