IP CAMERA QUICK START GUIDE
3. CONFIGURING THE CAMERA
Outer Camera Connections
RJ45 10M/100M Base-T Ethernet (PoE/Video)
Audio Input (except CVP9328DNIR-IP2M-Z)
Audio Output (except CVP9328DNIR-IP2M-Z)
DC1V Power Connector
Alarm Input (except CVP9328DNIR-IP2M-Z)
Alarm Output (except CVP9328DNIR-IP2M-Z)
Analogue SVO (for CVP9328DNIR-IP2M-Z)
DC12V Output (except CVP9328DNIR-IP2M-Z)
- If using DC12V/AC24V to power the camera, ensure the power supply matches the
camera power supply requirements specified and connect to the camera DC12V/AC24V
power input.
- Connect the RJ45 connector to a network switch. If the network switch supports Power over
Ethernet (PoE), disconnect any DC12V/AC24V power connections.
- View the image on a monitoring device—such as a BNC test monitor—to confirm the
power and video connections are properly working.
- For models that also provide DC12V Power Output, please note the power supply capacity
is max. 100mA.
Inner Camera Connections
Summary of Contents for CVP9328DNIR-IP2M-Z
Page 8: ......
