8
V1.0 (01-03/2017)
IR Network High Speed Dome
User Manual
3
Device Installation
3.2.3
Pendant Installation
Step 1 M
ake marks based on suspension bracket size for drilling the hole. Drill four
φ
8 holes
over 60 mm depth. The bracket installation size is shown in Figure 3-4.
Figure 3-4 Bracket installation size
Step 2
Insert the expansion bolts into the holes.
Step 3
Thread all cables through the cable hole on the side of the suspension bracket, as
shown in the Figure 3-5.
Figure 3-5 Thread the cables through the cable hole on the bracket