IR Network High Speed Dome
User Manual
4
Quick Configuration
Issue V1.0 (2015-09-30)
15
Parameter
Description
Setting
Subnet Mask
Subnet mask of the network
adapter.
[Setting method]
Enter a value manually.
[Default value]
255.255.255.0
Default Gateway
This parameter must be set if
the client accesses the device
through a gateway.
[Setting method]
Enter a value manually.
[Default value]
192.168.0.1
Preferred DNS
Server
IP address of a DNS server.
[Setting method]
Enter a value manually.
[Default value]
192.168.0.1
Alternate DNS
Server
IP address of a domain server.
If the preferred DNS server is
faulty, the device uses the
alternate DNS server to resolve
domain names.
[Setting method]
Enter a value manually.
[Default value]
192.168.0.2
MTU
Set the maximum value of
network transmission data
packets.
[Setting method]
Enter a value manually.
Note
The MTU value ranges
from 800 to 1500, the
default value is 1380,
please do not change it
arbitrarily.
Step 3
Click
Apply
.
!
If the message "Apply succeed!" is displayed, click
Confirm
. The system will save
the settings. The message "Set network parameter success, Please login system
again" is displayed. Use the new IP address to log in to the web management
system.
!
If the message "Invalid IP Address", "Invalid Subnet Mask", "Invalid default
gateway", "Invalid primary DNS", or "Invalid space DNS" is displayed, set the
parameters correctly.
If you set only the
Subnet Mask
,
Default Gateway
,
Preferred DNS Server
, and
Alternate
DNS Server
parameters, you do not need to log in to the system again.
----End