145
EN
MNV3660
LOADING THE RINSE AID
The rinse aid is used in the last stage of rinsing to prevent the drops of water from staying and drying out on the
dishes leaving undesirable stains on the dishes.
1. Open the appliance door.
2. Open the rinse aid dispenser as shown in Pic.3.
3. Slowly pour the rinse aid into the dispenser (Pic. 4). The capacity of the empty dispenser is about 140 ml.
4. After filling close the rinse aid dispenser cover and tighten it (Pic. 5).
If the indicator of the amount of the rinse aid lights up, you must refill the dispenser before starting a new washing
cycle! The amount of the rinse aid can be checked visually according to C indicator, which is located next to the rinse
aid dispenser. If there is enough of the rinse aid in the dispenser the window is black. The size of the black dot in the
window depends on the amount of rinse aid in the dispenser. If the window is clear, the dispenser is empty. The level
of the rinse aid should not drop below ¼.
Note:
• The rinse aid dispenser is located on the door next to the detergent dispenser.
• The appliance is designed to be used only with liquid rinse aids.
• If there is a spillage of the rinse aid, wipe it out using an absorbent cloth or run a short washing cycle to wash it
away.
Caution!
• Use only rinse aids designed for use in dishwashers. Never pour detergents into the rinse aid dispenser.
• Load the rinse aid before running the short washing cycle to wash away any spilled rinse aid residues and
prevent the risk of corrosion of the appliance interior.
Pic. 3
Pic. 4
Pic. 5
C (rinse aid level indicator)
Full
¾ Full
½ Full
¼ Full
Empty
Summary of Contents for MNV3660
