Door lifting spring strength
adjustment
Due to the material used for the cover
plate, the weight will diff er accordingly.
You may set the spring strength using
screws (Fig. 20) on the front side so that
the door holds in the open position, and
close smoothly when lifted.
Connection of the discharge hose
Connect the discharge hose:
a) to a discharge pipe with a diameter of 40 mm with a hole,
b) or use the supplied adapter that enables discharge into a basin or a bathtub. Note: If you use the adapter, it must be
fi xed properly. Otherwise, it can come loose and the water can spill on the fl oor.
c) Or use the siphon side hose of the sink or basin. Fix the hose to the lower side of the worktop. Thus, you will prevent
the water from fl owing back into the dishwasher.
The end of the discharge hose should be 400 – 1,000 mm (Fig. 21) above the fl oor, not immersed in water to prevent
back fl ow.
Make sure the hose is not bent or jammed to prevent a reduced or stopped water supply.
92
MNV4545
EN
Fig. 20
Fig. 21
Summary of Contents for MNV4545
Page 2: ......
Page 76: ...74 MNV4545 PL ...