INSTALLATION OF THE DISHWASHER
When installing the dishwasher, follow these instructions:
1. Check the dishwasher after delivery.
Note:
All the functions have been checked thoroughly during manufacture. Small water stains may be left after these
tests. They will disappear after the fi rst washing.
2. Fix the cover plate to the door.
3. Adjust the door lifting spring strength.
4. Connect the supply hose to the water mains.
5. Connect the discharge hose to the drain pipe.
6. Stick condensation strip on the lower edge of the worktop (supplied) to reduce the humidity permeating the
worktop (Fig. 24).
7. Connect the dishwasher to the electric power network.
8. Put the dishwasher in the selected place.
9. Adjust the dishwasher to a horizontal position using the feet. Adjust the height of the front feet with a wrench,
adjust the height of the rear feet with a screwdriver (Fig. 24). Check the horizontal position using a level.
94
MNV4545
EN
Fig. 24
Summary of Contents for MNV4545
Page 2: ......
Page 76: ...74 MNV4545 PL ...
