Disassembling
If you disassemble the appliance, it is important to follow the steps in the correct order:
1. First, unplug the power cord from the mains (pull the plug out or switch off the circuit breaker).
2. Subsequently disassemble individual parts of the hood in reverse order of the appliance installation.
Fig. 11
Screwing the
upper chimney
part to the
bracket
Fig. 9
Fig. 8
Screwing the
lower chimney
part bracket
Fig. 7
Fig. 6
Fig. 5
CORRECT
CORRECT
INCORRECT
Fig. 4
Screwing the
hood bracket
110 - 500
Fig. 3
Fig. 10
Screwing the
upper chimney
part bracket
EN
EN
59
58
OPK 4660
OPK 4660