TROUBLESHOOTING
Defect description
Possible cause
Solution
Lamps illuminate but the
motor stands idle
The motor blades are blocked.
Contact the service centre.
The motor or its essential parts are
damaged.
Contact the service centre.
The plug inserted incorrectly or
insufficiently in the wall outlet.
Check connection of the plug.
The wall outlet is not energized.
Check that the wall outlet is
energized, e.g. by connecting another
appliance.
Lamps do not illuminate
and the motor stands idle
The plug inserted incorrectly or
insufficiently in the wall outlet.
Check connection of the plug.
The wall outlet is not energized.
Check that the wall outlet is
energized, e.g. by connecting another
appliance.
Fat drops from the metal
fat filters
Heavily fouled filters.
Risk of fire!
Immediately clean or replace the
metal fat filters.
The appliance vibrates
when the appliance is on
The motor blades are damaged.
Contact the service centre.
The motor is not fixed fast.
Contact the service centre or fix the
motor fast.
The hood is not fixed fast.
Fix the hood fast.
Insufficient exhaust of
the extracted air
Distance between the hood and the
cooking plate is too long.
Reduce distance between the hood
and the cooking plate.
Strong draught, too many doors or
windows opened.
Close some doors or windows.
The motor stopped
working
The thermal overload protection against
the motor overheating triggered.
Improve the room ventilation, open
doors or windows or check distance
between the hood and the cooking
plate. If required, increase distance
between the hood and the cooking
plate.
The hood is not levelled
The hood bracket is not levelled or the
bracket screws are not tightened firmly.
Check the bracket for being levelled
or tighten holding screws and level
the hood.
70
EN
OPK5860bc
