46
EN
OPP1060 / OPP1060bc
INSTALLATION OF THE APPLIANCE
The appliance should be connected by a qualified professional!
• The buyer, not the manufacturer, is responsible for installing the appliance. Defects caused by incorrect installation
are not covered by the warranty.
• Remove all packaging and marketing materials from the appliance before first use.
• We recommend entrusting the installation to a specialist company.
• The manufacturer accepts no liability for damage to persons, animals or property due to incorrect installation.
Follow the procedure below to install the appliance:
1. Remove all packaging and marketing materials from the appliance before first use.
2. Mark the minimum required mounting height (650 mm for electric and 750 mm for gas hobs) on the wall behind
the hob or hob.
3. Mark the center of the hob (stove) with a vertical line.
4. Drill the holes and fasten the hood according to Fig. 4 into the upper box, or according to Fig. 5 to the wall.
5. Make sure that the hood is in a horizontal position to prevent the accumulation of grease (grease)
on one side (Fig. 6).
6. After hanging the hood, attach the flexible outlet pipe to the outlet. Insert the other part of the flexible pipe into
the prepared hole in the wall.
7. Plug the power cord into an electrical outlet.
Fig. 6
correct
incorrect
Fig. 4
Fig. 5
