60
OPP1260bc / OPP1260wh
EN
Disassembling
If you disassemble the appliance, it is important to follow the steps in the correct order:
1. First, unplug the power cord from the mains (pull the plug out or switch off the circuit breaker).
2. Subsequently disassemble individual parts of the hood in reverse order of the appliance installation.
TROUBLESHOOTING
Defect description
Possible cause
Solution
Lamps illuminate but the
motor stands idle
The motor blades are blocked.
Contact the service centre.
The motor or its essential parts are
damaged.
Contact the service centre.
The plug inserted incorrectly or
insufficiently in the wall outlet.
Check connection of the plug.
The wall outlet is not energized.
Check that the wall outlet is energized,
e.g. by connecting another appliance.
Lamps do not illuminate
and the motor stands idle
The plug inserted incorrectly or
insufficiently in the wall outlet.
Check connection of the plug.
The wall outlet is not energized.
Check that the wall outlet is energized,
e.g. by connecting another appliance.
Fat drops from the metal
fat filters
Heavily fouled filters. Risk of fire!
Immediately clean or replace the metal
fat filters.
The appliance vibrates
when it is on
The motor blades are damaged.
Contact the service centre.
The motor is not fixed fast.
Contact the service centre or fix the
motor fast.
The hood is not fixed fast.
Fix the hood fast.
Insufficient exhaust of the
extracted air
Distance between the hood and the
cooking plate is too long.
Reduce distance between the hood and
the cooking plate.
Strong draught, too many doors or
windows opened.
Close some doors or windows.
The motor stopped
working
The thermal overload protection against
the motor overheating triggered.
Improve the room ventilation, open
doors or windows or check distance
between the hood and the cooking plate.
If required, increase distance between
the hood and the cooking plate.
The hood is not levelled
The hood is not levelled or the bracket
screws are not tightened properly.
Check the hood for being levelled or
tighten holding screws and level the
hood.
Summary of Contents for OPP1260bc
