64
OPV3860bc
EN
DESCRIPTION OF CONTROL PANEL BUTTONS
Appliance On/Off button
•
Press and hold the button to turn the appliance on, press the button again to turn the appliance off.
•
When pushed, the button illuminates.
•
When the appliance is turned on again, the extracted air output will be set to the last set output value. This value
is shown on the display.
•
However, when the appliance is switched on again with the slide-out front inserted, the exhaust air output will
always be set to the lowest output value (1).
Plus (+) button
•
Push the button to increase extracted air exhaust output.
•
When pushed, the button illuminates and the display shows the output value (1-3).
•
If the output value is 3 and the plus (+) button is pushed, only an audible signal will sound and the display will show
the highest output value (3).
•
You can increase the extracted air output only when the appliance is switched on.
Display
•
The display shows the extracted air exhaust output.
Minus (-) button
•
Push the button to decrease extracted air exhaust output.
•
When pushed, the button illuminates and the display shows the output value (1-3).
•
If the output value is 1 and the minus (-) button is pushed, only an audible signal will sound and the display will
show the lowest output value (1).
•
You can decrease the extracted air output only when the appliance is switched on.
Lighting On/Off button
•
Press and hold the button to turn the lights on, press the button again to turn the lights off.
USER'S MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons.
Ventilation mode
The extracted air is discharged through the flexible outlet duct to the ventilation shaft out of the room. If the appliance
is equipped with a carbon filter, remove it (see chapter Cleaning and maintenance).
1. Deploy the slide-out front to the desired distance.
2. When the slide-out front is deployed, all the buttons and the screen will be lit for a moment. Simultaneously, a
beep sound will occur to signalise the control panel buttons are active.
3. Press and hold the button (1) to turn the appliance on.
4. Using buttons (2) and (4) select the required value of the extracted air exhaust output.
5. The display shows the output value (1-3).
6. Push button (1) to switch the appliance off.
Summary of Contents for OPV3860bc
