EN
34
RM3230
JUICER
WARNING!
Prior to fitting the attachments, make sure the appliance switch (3) is in the OFF position and that the feed
cord is disconnected from the socket.
1. Make sure the safety lid (1) is correctly fitted.
2. Fit the working bowl (13) on the motor part (5).
3. Fit the juicer extension (7) in the bowl.
4. Use the juicer lid (15) to close the bowl. Make sure the lid has clicked in properly.
5. Get the fruits to be juiced ready.
6. Connect the feed cord into the socket.
7. Switch the motor on and set the speed in the MAX position.
8. Cut the fruits and insert the pieces in the lid opening. Use the pusher to add fruits; do not use any other objects
or your hands to do so.
9. When you finish, set the switch in the OFF position and disconnect the cord from the socket.
10. Open and empty the working bowl.
11. Wash the attachments and let them dry properly.
• Switch the appliance off and disconnect from the socket if the juicer extension needs cleaning. Let the rotating
parts stop, open the lid and use a spatula to remove deposited fruit flesh.
BLENDER
WARNING!
Prior to fitting the attachments, make sure the appliance switch (3) is in the OFF position and that the feed
cord is disconnected from the socket.
1. Fit the blending extension (12) on the motor part (5). Take care; the blades are very sharp.
2. Fit the empty working bowl (13) on the motor part and close it with the lid (20). You will not be able to start the
machine if the bowl is not closed properly. If you use the blending extension (12), the working bowl (13) must be
empty and without any other attachments fitted inside.
3. Put the food in the blending extension (12) and close it with the lid (18) and the small lid (19).
4. Connect the feed cord into the socket.
5. Switch the motor on and set the speed in position 2 – MAX. To blend soft food, such as bananas, start at a low speed,
then increase the speed up to the required rate. You should always apply the maximum or MAX speed to hard food,
such as carrots.
6. When you finish, set the switch in the OFF position and disconnect the cord from the socket.
7. Open, remove, and empty the working bowl. You may use the spatula (9) to empty the bowl more easily.
8. Wash the attachments and let them dry properly.
• Do not blend more than 300 g of hard food in one go and let the motor run for no longer than 20 seconds.
• If crushing ice cubes, fill a maximum of 300 ml of ice into the bowl and crush for no longer than 15–20 seconds.
• Do not blend more than 1000 ml in one go to prevent the blended liquid, such as soups, from overflowing.
• Take care using the blender and keep away from moving parts. Do not let your hair or garments hanging loosely.
