Page 2
Operating your
blind:
Operating your blind
is easy. Just follow
these instructions.
•
To adjust the angle
of the louvres, twist
the wand and the
louvres will turn
through 180 degrees.
•
To open and close
the blind, pull the
wand ensuring the
louvres are in the
open position.
•
From time to time
your louvres may be
knocked out of
alignment. To re-
align the louvres
remove them from
the headrail and
draw into the open
position. Using the
wand rotate the
hooks (that hold the
louvres onto the
headrail) until they
are aligned. You will
feel some resistance
and you may hear
a clicking noise, this
is normal and you
should continue to
operate the wand
until the hooks are
fully aligned.
To Fit the Louvres
1.
Keeping them in a roll, slot a hanger into each
one making sure that all the hangers are the
same way up. This should be done with the
protruding lugs facing up.
2. Clip the louvres onto
the headrail. To
shorten the length of
the louvres, turn the
hangers upside
down in the louvres.
3. Starting from one
end, snap the
stabilising chain on to
the bottom weights
on both sides.
