ENGLISH
31
4.3
Initial configuration
Before you can start using the Home Media Store as a network storage location, some device settings must be
made. These settings are described in the subchapters below.
4.3.1
Setting the time & date
Select “
GENERAL
” in the top bar of the configuration page.
Select “
DATE / TIME
” in the left bar of the configuration page.
The „
DATE / TIME
‟ configuration will be shown on your screen:
By default, the Home Media Store will obtain the date & time automatically from the internet by using a time
server, which is listed in the field „
NTP server
‟.
You can verify if the correct date & time is obtained from the internet in the section „
Current date & time
‟.
If the date & time settings are correct, you can proceed to
chapter 4.3.2
to change the network configuration.