ITALIANO
27
3. Installazione hardware CHD3UL
3.1
Assemblaggio del CHD3UL (nel caso in cui non sia già stato installato un disco
rigido)
Se il CHD3UL è stato acquistato con un disco rigido preinstallato, si può saltare questo
passo e procedere direttamente al passo 3.2
a.
Togliere le due viti poste sulla parte posteriore del CHD3UL ed estrarre la placca
posteriore.
b.
Estrarre con delicatezza il vassoio del disco rigido dalla sua posizione.
c.
Collegare l’alimentazione e il cavo IDE al disco rigido e collocare quest’ultimo
nell’apposito vassoio.
d.
Capovolgere il vassoio e utilizzare le quattro viti in dotazione per stringere il disco
rigido al vassoio stesso..
e.
Mettere di nuovo il vassoio nella sua posizione, montare di nuovo la placca posteriore
alla parte posteriore del vassoio e utilizzare le due viti per stringere la placca
posteriore.
Nota:
Il disco rigido deve essere impostato su “Master” o “Single”, a seconda
del tipo di hard disk in uso. La procedura per realizzare questa
impostazione viene indicata sul disco rigido stesso o in questo manuale.