Page 7
LISTENING TO THE RADIO
TO SEARCH FOR A STATION
AUTOMATICALLY
Press the
TUNING/SKIP
button for 1 to
2 seconds, and a station is searched for
automatically. After tuning in a station, the search
stops.
The search may not stop at a station with a very
weak signal.
TO RECEIVE THE FM BROADCAST IN
STEREO
When receiving FM broadcasts in stereo, the word
“STEREO” will illuminate.
TUNING INTO A STATION MANUALLY
2. Press the
STOP/BAND
button to select the desired
band “AM” or “FM”.
3. Press the
TUNING/
SKIP
buttons to select
a station.
1. Press the
FUNCTION
button
to TUNER.
TUNING INTO A PRESET STATION
NOTE:
If a button is not pressed within 10 seconds the preset mode will exit automatically.
PRESET
REPEAT
Press the
PRESET/REPEAT
button on the remote control to select a preset number.
PRESETTING STATION (for remote only)
Your favourite radio stations can be tuned in to by selecting their preset numbers. It is possible to store up
to 10 preset stations for FM band and 10 preset stations for AM band in the order of your choice.
1. Set to the desired band and
station.
2. Press the
MEM
button
until the MEMORY indicator
blinks.
3. Press the
PRESET/REPEAT
button to select a channel
number for the preset station
on the remote control.
4. Press the
MEM
button
again to memorize the station.
5. Repeat steps 1 to 4 for the next preset.
Manual memory presetting
This feature allows you to manually preset stations to any desired channel.
