Concertone ZX300, Operating Instructions Manual

Auto Scan

Push and Hold [SETUP] button longer than 3 seconds, the unit will select AUTO 

SCAN function . 

The difference  between Auto Seek and Auto Scan is that,  under Auto Scan , the unit 

will automatically preset any available station in order from low to high until all the 

preset positions have been filed, but  the Auto Seek function will not store stations.

Note: To prevent the loss of favorite preset stations by pushing [SETUP] in error 

the Auto Scan function can only be set if the [SETUP] button is held more than 3 

seconds 

LOCAL/DISTANCE (LOC/DX)

This unit is able to automatically determine whether the signal from a radio station is 

too strong or not . 

When the signal is too strong, the audio output may become distorted . With this unit, 

the signal is automatically reduced to keep the output clean . LOC will be shown on 

the digital display . 

When the signal is normal, the unit does not need to reduce the signal . LOC will not 

be shown if set automatically . Local can manually be set with the LOC/DX button 

ST/MONO

This function is to allow the user to determine whether to play the FM station 

in stereo or mono . Normally, in FM, when the program of a selected station is 

broadcasting in stereo with a week signal .  Setting Mono may help with a clearer 

signal . Press this button to select between Stereo and Mono .

Weather Band Reception

Press the [BAND] button to choose the Weather Band .

Once the unit is set on the Weather Band function, it will automatically search for 

an available station among the 7 preset US Weather Bureau frequencies . When 

the signal is not strong enough to receive the last weather band station, the unit will 

automatically search for another weather band station again within 15 seconds .

The users can also manually select a whether band station by pressing  any  of 

the 1-7 numbers which have already been factory preset to the 7 Weather Band 

frequencies .  

INPUT Function

This unit has one input to allow the users to enjoy Audio entertainment from other 

sources such as Satellite Radio, iPod,or another external audio source  which has 

been connected to the unit through the inputs on the back of the unit .

To use these Inputs, press the [INPUT] button on the remote control or the 

[FUNCTION] button on the front panel until INPUT is shown on the Digital Display . 

CONCERTONE

®

11