11
TAKING PICTURES AND VIDEOS CLIPS
TAKING PICTURES
1. Power on the camera.
2. Slide the
Function
switch to
(Capture mode).
Note:
In picture taking mode, the
icon will be shown on the lower
left side of the LCD. If this icon is not shown, press the
button
repeatedly until the
icon is shown.
3. Frame your subject with the LCD or viewfinder.
4. Hold the camera still and press the
Shutter
button to take the picture.
• The
and
icon will be shown briefly on the LCD after the
Shutter
button is pressed, which
indicates that the camera is saving the picture. Do not power the camera off or remove the
batteries before the picture is saved.
Note:
If Quick View function is turned on(See ‘
Customizing Your Camera Settings
’), the LCD will
show the image just taken and the options of:
Save:
Press the
Enter
button to save the image.
Delete:
Press the
button to select “
delete
” and then press the
Enter
button to delete the image.
If no action is taken, the picture will be saved in 15 seconds or so.
TAKING PICTURES IN MARCO MODE
This mode enables the camera to take pictures in close distances.
1. Slide the Macro Switch to
position. The Macro icon (
) will be
displayed on the LCD.
2. Frame the subject in the LCD.
• The best shooting range is between 40 cm to 50 cm (15.76 in. – 19.89
inches.)
3. Press the
Shutter
button to take the picture.
Important:
When Macro shooting is not needed, remember to slide the Macro Switch back to
Landscape (
) mode. Otherwise your pictures taken with shooting range go beyond 50 cm
might be blurry.
TAKING PICTURES AND VIDEOS CLIPS
1
2
3
Macro Switch
