23
6.3.2
Regeneration indicators
Regeneration indicators appear in black text on a red background and only when
a regeneration is in progress. Information on cycle steps only appears while the relevant
cycle step is being executed.
6.4
Power failure, notifications and faults
6.4.1
Power failure
The control unit retains the settings (incl. time) in the non-volatile memory after a power failure if
the battery is still charged. Otherwise, the non-rechargeable CR 2032 battery must be replaced
and the time reset.
Following a longer power failure, the display flashes. This is an indication that the battery
should be replaced. Even in the event of a power failure, as long as the battery is working,
the regeneration steps are stored, then continued after power has been recovered.
6.4.2
Notifications
In addition to the indication of the regeneration steps in the display, control unit output RLY1
is active throughout the undisturbed regeneration.
6.4.3
Faults
If the word ERROR appears together with a number in the display, the control unit is no longer
working properly. If there is an internal fault in the control unit, control unit output RLY2 is active.
In this case, contact the system manufacturer.
The displays are as follows:
Alternating with the contact details. Control
Control unit
Meaning
Display
Display of the remaining cycle time
for backwashing
Backwash
3:37 min.
Display of the remaining cycle time for
salting/slow washing
Salting
62:45 min.
Display of the remaining cycle time for
quick washing
Quick rinse
5:10 min.
Display of the remaining cycle time for filling
the brine tank
Fill
4:28 min.
Display of the remaining regeneration time
remains on throughout the regeneration
Remaining regeneration time
17:12 min.
Summary of Contents for CONDAIR SOFT
