9
KNX Gateway
3.4
Importing the project file "MN Option KNX.KNXPROJ" into the ETS5
software
1. Start the ETS5 software on your labtop connected to the KNX network.
2. Open the project file "MN Option KNX.KNXPROJ" which you have previously downloaded from the
Condair HumiLife website.
3. After you have opened the project file "MN Option KNX.KNXPROJ" with the ETS5 software, the
device "KNX BAOS 82x 87x" appears. This device forms the interface between the Condair MN and
the existing KNX home automation system (see
).
Fig. 3: Download the "MN Option KNX.KNXPROJ" project file
4. Drag or copy the interface from the MN Option KNX project into your existing project (see
).
Fig. 4: Example of an existing project
5. Now you can create the group addresses according to the rooms or zones and link them with other
KNX components.
Note: The group addresses can be freely selected by the integrator, as certain addresses may
already be assigned to existing installations.