2
For your safety
General
Every person working with the Condair CP3 D must have read and understood the Technical Docu-
mentation before carrying out any work.
Knowing and understanding the contents of the Technical Documentation is a basic requirement for
protecting the personnel against any kind of danger, to prevent faulty operation, and to operate the
unit safely and correctly.
All ideograms, signs and markings applied to the unit must be observed and kept in readable
state.
Qualification of personnel
All actions described in the present Technical Documentation (installation, operation, maintenance,
etc.) must be carried out only by
well trained and sufficiently qualified personnel authorised by
the owner
.
For safety and warranty reasons any action beyond the scope of this manuals must be carried out
only by qualified personnel authorised by the manufacturer.
It is assumed that all persons working with the Condair CP3 D are familiar and comply with the ap-
propriate regulations on work safety and the prevention of accidents.
Intended use
The steam generator Condair CP3 D is intended exclusively for generation of steam for a steam
bath within the specified operating conditions
(see chapter 10 “Product specifications”). Any
other type of application without the express written consent of the manufacturer is considered as not
conforming with the intended purpose and may lead to the Condair CP3 D becoming dangerous.
Operation of the equipment in the intended manner requires
that all the information in these
instructions is observed (in particular the safety instructions)
.
