0
6.5.3
Interrogation of the malfunction list
Select the error history list:
Path:
Main menu > Info > ErrorHistory
The last error that occurred is shown with:
– running number of the error
– date and time of occurrence (version Pro only)
– error code (Warning: W..., Error: E...
– error message
– additional info text regarding the error
Press
< >
and
< >
keys, in order to select further error messages in
the list.
Press the
<Esc>
key several times to quit the error history list and to
return to the standard operating display.
The error messages generated by the last 20 malfunctions that occurred are saved in the malfunc-
tion list of the Condair CP3 D and can be interrogated.
ErrorHistory
E32A Temp.Sensor void
No sensor signal
Temp.Sensor damaged
01/05 11.11.06 12.34
11.11.2006 12.00.00
Esc
Set
6.6
Unit settings
6.6.1
Setting the setpoint temperature
Select “
Setpoint
” in the main menu, then press the
<Set>
key.
In the upcoming modification dialogue set the desired nominal tempera-
ture for the steam bath.
Factory setting:
48 °C
Setting range:
25 °C ... 55 °C
6.6.2
Setting the control mode
Note: This setting is available only if the setting “Operation” in the steam bath settings (see chapter
...3) is set to “Intern”.
Select “
Mode
” in the main menu, then press the
<Set>
key.
In the upcoming modification dialogue set the desired control mode.
Factory setting:
Manual
Options:
Manual
,
Timer
Main Menu
Mode :Manual
Aroma :Set
Info :Set
Setpoint :48°C
User :Set
Esc
Set
Main Menu
Mode :Manual
Aroma :Set
Info :Set
Setpoint :48°C
User :Set
Esc
Set
