33
5) Use the
Up/Down Arrow
to select the option.
6) Press
Ent
to confirm the setting.
7) Press
Exit
to exit the setting.
System Reset
System Reset is used to restore original factory setting.
To set the System Reset:
1) Press Menu to enter into menu setting.
2) Repeatedly press Menu to switch to SYSTEM
menu.
3) Use the Up/Down Arrow to select System Reset
option.
4) Press Ent to enter into setting.
5) Use the Up/Down Arrow to select the option.
6) Press Ent to confirm the setting.
7) Press Exit to exit the setting.
Simulator
Simulator is used to let you practicing using the Fish finder as if you were on the
water.
Under the simulating mode, the simulated bottom signal with fish signals will
display and move across the screen, and under the simulating mode, you still
could change settings to view different sonar image to have a complete
understanding of your Fish finder.
To set the
Simulator
:
1) Press
Menu
to enter into
menu
setting.
2) Repeatedly press
Menu
to switch to
SYSTEM
menu.
3) Use the
Up/Down Arrow
to select
Simulator
option.
4) Press
Ent
to enter into setting.
5) Use the
Up/Down Arrow
to select the option.
6) Press
Ent
to confirm the setting.
7) Press
Exit
to exit the setting.