Operating Instructions (GB)
900 191 - V1.0
_________________________________________________________________________________
Page 14
7.4
Main display – Symbols
A detailed explanation and settings are shown in Chapter 10.
1)
Optional accessories required.
The main display informs the operator of the
current status of the infeed, pump-out, fill level in
the pump shaft, pending faults and advanced
functions.
Click on the symbol to access additional functions
or information.
Some of the functions described here are only
available after prior activation or with the optional
hardware!
Main menu:
Pressing this symbol will open the main menu, which
contains further submenus. All relevant settings are made here.
Battery charge level*:
This symbol indicates the battery charge. A flash
is displayed over the symbol during charging. When the charge is
decreasing, the colour changes from green 100% > light green 75% >
orange 50% > red 25%. Click on the symbol for additional information.
Fault signals:
If a fault occurs during operation of the control system, this
symbol is shown in the main display. Press this symbol to open the error
message menu.
Maintenance/service due:
If a previously set maintenance date/service
is due, this symbol is shown and an interval tone sounds.
Click on the symbol for additional information.
GSM modem
1)
:
If the control system is equipped with a GSM module,
this symbol is displayed after activation. Click on the symbol to open the
status display for further information.
Network module
1)
:
