Operating Instructions (GB)
900 191 - V1.0
_________________________________________________________________________________
Page 5
2.7
Unauthorised modification and production of spare parts
Any modifications or changes to the control system are permitted only after consultation with
the manufacturer. Original spare parts are provided for safety reasons. The use of other parts
can make void the liability for the consequences arising from this.
2.8
Impermissible operating modes
The reliable operation of the control system can only be guaranteed if used as intended only.
The limit values given in the documentation must in no case be exceeded.
3.
Transport and in-transit storage
3.1
Transport
Professional transport of the device is required. The control system was checked for
compliance with all specified data before shipment. The control system is therefore known to
be in good electrical and mechanical condition upon receipt. Please check the control system
for transport damage upon acceptance. In the event of a complaint, a damage report must be
drawn up together with the supplier.
3.2
In-transit storage
In-transit storage must be in a dry place, without jolting and, whenever possible, in the original
packaging. The ambient temperatures must not be outside the range of -20°C to +70°C.
4.
General description of the control system
The control system automatically regulates the irrigation and de-watering of riding surfaces
with a specific substrate (draining system).
The optimal water level is manually adjusted and then automatically regulated by means of a
measuring signal from a hydrostatic measuring probe.
This ensures consistent humidity over the entire riding surface.
The unit is operated or configured via a TFT touch colour display.
These operating instructions describe the control functions in particular.
Further information is provided in the documents and drawings included with the control
system.
When parameters or menu settings are changed, it is possible that these
are not processed immediately by the control system. In such cases,
please reboot the control system.
