background image

 

SKU 92912

 

                   For technical questions, please call 1-800-444-3353.

 

Page 2

THANK YOU for choosing a 

HARBOR FREIGHT TOOLS 

product.  For future reference, please 

complete the owner’s record below:

Model______________ 

Serial No._____________  Purchase date_______________   

 

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS.  It is important that you read the 
entire manual to become familiar with the unit BEFORE you begin assembly.

Technical Specifications

 

 

 

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to 
reduce the risk of personal injury and damage to equipment.

   

  

Read all instructions before using this product!

 

1. 

Store idle equipment

.  When not in use, the Airplane must be stored in a dry location to inhibit 

damage from moisture and salt air. 

2. 

Check for damaged parts

.  Before using the Airplane, any part that appears damaged should 

be carefully checked to determine that it will operate properly and perform its intended function. 
Check for any broken or damaged parts and any other conditions that may affect its operation.  
Replace or repair damaged or worn parts immediately.  Do not use the Airplane if any part is 
damaged or broken.

3. 

Replacement parts and accessories

.  When servicing, use only identical replacement parts.  

Use of any other parts will void the warranty. 

4. 

For ages 16 and over.  do not let children use the Airplane without adult supervision.  

Failure to do so could result in personal injury and/or property damage.

5. 

Keep  your  work  area  clean  and  well  lit.

    Cluttered  benches  and  dark  areas  invite  acci-

dents.

6. 

Always check hardware and assembled parts after assembling.  

All connections should 

be tight and hardware tightened.

Wingspan .............................. 26

3

/

4

Wing Area ............................. 96.1 sq. in.
Fuselage Length ................... 19

1

/

2

Weight ................................... ~4

1

/

4

 oz.

Battery .................................. 4.8V, 300 mAh, NiMh
Flight Time ............................ About 10-15 minutes
Remote Control ..................... 2 Channel
Remote Power ...................... 6 “AA” Batteries (Not included)
Battery Charger Input ........... 120 VAC, 60 Hz

Rev 09j

Summary of Contents for 92912








Reviews: