SKU 92912
For technical questions, please call 1-800-444-3353.
Page 5
Assembly
1.
Connect the plug from the Motors (5) to the connector on the Receiver (10). See
Figure 1
.
Make sure that the plug is securely attached to the connector.
2.
Place the Wings (3) on top of the Fuselage (1). Make sure that all wires fit within the Fuselage
without being pinched or kinked. Attach the Wings (3) to the Fuselage (1) using three Screws
(15) as shown in
Figure 2
.
Set out all parts on a clear and level surface prior to assembly.
3.
Place the bracket on the Tail Fin (8) through the Tail Stabilizer (7) (shown in
Figure 3
) and into
the holes at the back of the Fuselage (1).
4.
Secure the Tail Fin (8) to the Fuselage (1) using two screws from underneath as shown in
Figure 4
.
Figure 3
Figure 4
Tail Fin (8)
Tail
Stabilizer
(7)
Screws
(15)
Tail Stabilizer
& Fin (7,8)
Figure 1
Figure 2
Wings (3)
Fuselage (1)
Screws
(15)
Fuselage (1)
Wings
(3)
IMPORTANT:
If damage is caused due to a crash, your warranty is void.
REV 05/06
