CONDRE AutoTracer NAS
••••
User’s and Installation Manual
09/26/02
(6 of 22)
You may precede the line with the text: “
http://
” (without the double quotes). Use the proper TCP/IP address of the
appliance. The one shown in the example differs from the one on your appliance. If in doubt, consult with your network
administrator.
The “
Terminal Services Web Configuration
” page is displayed.
The following figure illustrates the web page that would be displayed.
Figure 1 tsweb Setup
•
In the “
Server
” field enter the current IP of the appliance. The “
216.17.32.188
” TCP/IP address used in this
example is the default value for the appliance. The proper address for the AutoTracer NAS appliance must be specified.
•
Select a “
Size
” for the window that will be created when opening a session via tsweb. Keep in mind that the new
window will be enclosed within the browser unless the “
Full-screen
” option is selected.
•
Click on the “
Connect
” button.
The appliance logon screen will be displayed.
•
In the “
User Name
” field enter the string “
Administrator
” (without the quotes).
•
In the “
Password
” field enter the string “
2sie!
” (without the double quotes).
•
Click on the “
OK
” button. You will now be logged on the appliance.
The following figure illustrates the previously listed steps.
