8
9
user manual
user manual
EN
EN
CROSS
LINE LASER
CROSS
LINE LASER
CONDTROL NEO G1-360
CONDTROL NEO G1-360
Place an instrument on a firm and stable surface or a tripod.
Move compensator lock to choose necessary operating mode:
1 Automatic leveling, to build horizontal and vertical planes and
lines:
Move compensator lock to unlocked position . Compensator is
unlocked. If the product is out of the range of automatic compensation
it will emit sound signal.
Short press button
LINE
to turn on necessary laser planes.
Short press button
MODE
to switch on/off pulse mode that allows
working with laser receiver. In this mode pulse mode indicator will
turn green.
To switch off the product move the compensator lock to locked
position .
2 Locked compensator, to build inclined planes and lines:
Move the compensator lock to locked position . Compensator is
locked. Short press button
MODE
to turn on the product. Horizontal
plane will switch on. Locked pendulum indicator turns red.
Short press button
MODE
to turn on necessary laser planes.
TECHNICAL SPECIFICATIONS
Working range/with receiver
30 m / 60 m*
Self-levelling accuracy
±0.3 mm/m
Self-levelling range
± 4.5°
Operating temperature
0°C ... +50°C
Storage temperature
-20°C ... +70°C
Tripod mounting thread
5/8’’ and 1/4’’
Dust and water protection rate
IP54
Laser type
Class II 520 nm < 1 mW
Power supply
3.7V 1500mAh
Dimensions
130х73х125mm
Weight
0.45 kg
* The operating range may differ from the declared depending on the
lighting conditions.
OPERATION
Before start operation remove the battery cover, insert the batteries,
observing correct polarity. Put battery cover back.
Use alkaline AA batteries only, all batteries should be of the same type
and brand with the same charge level. Replace batteries if battery
charge level indicator turns red while operation.
