background image

 

Powering off display 

It’s better to replace batteries now. 
 

6.3. Battery safety and usage 

 

Batteries  should  be  stored  in  an  ambient  temperature  of  -4°F  (–20°C)  to 
67.9°F  (+20°C).  Lithium  batteries  will  self-discharge  during  storage,  so  they 
should be  fully charged before storage.  Self-discharge  may affect long term 
battery  performance.  Furthermore,  it  is  recommended  that  the  battery 
should be charged in a set time, as below; 
Ambient temperature of: 

 

-4°F (–20°C) to 67.9°F (+20°C), once  every 6 months 

 

67.9°F (+20°C) to 113°F (+45°C), once every 3 months 

 

113°F (+45°C) to 149°F (+60°C), once every month 

 

Battery should have greater than 50% charge prior to recharge. 

 

The ambient temperature for charging should be 32°F (0°C) to 104°F (+40°C). 
If  under  32°F  (0°C),  the  battery  capacity  will  be  diminished;  if  over  104°F 
(+40°C), the battery may overheat, resulting in permanent damage. 

 
WARNING:

 

Never disassemble, incinerate or puncture battery 
Never short circuit the battery 
Keep battery dry 
Keep out of reach of children 
Always dispose of battery in accordance with local, state and federal regulations 
 

6.4. Menu 

 

Main menu 

 

1  -  Main  menu: 

Displays four options: Measurement, auto/manually, Setup, and 

File. 

2 - Low-level menu:

 The 

>

 indicates a low-level menu is available, accessed by the 

right arrow key. 

 
Dialog box 

 

1 - Dialog box name: 

Displays the dialog box name, e.g. Measuring Setup. 

2 - Item title

A dialog box may contain several items, such as Temp Range. 

Summary of Contents for IR-CAM4





















Reviews: