8
9
user manual
Cross
line laser
en
CONDTROL Octoliner Servo
user manual
Cross
line laser
en
CONDTROL Octoliner Servo
tECHNICAL sPECIFICAtIoNs
Working range
30 m
Working range with receiver
100 m
Accuracy
± 0,1 mm/m
Self-levelling
electronic
Self-levelling range
± 4°
Operation temperature
-10°C…+50°C
Waterproof and dustproof
IP54
Continuous working time
up to 8 h
Laser type
Class II, 635 nm, <1 mW
Power supply
3,7 V 5400 mAh Li-ion
rechargeable
Dimensions
210 x 110 x 110 mm
Weight
1,535 kg
sEt
1. Laser level - 1 pc.
2. Laser intensive glasses - 1 pc.
3. Adapter for mounting on a tripod 5/8” – 1 pc.
4. Battery charger – 1 pc.
5. Laser target - 1 pc.
6. User manual – 1 pc.
7. Plastic case – 1 pc.
BAttERY CHARgINg
For charging use battery charger included in the set.
If power indicator starts flashing while operation, please charge the
batteries.
Full charging takes approximately 4 hours. While charging battery
charge indicator will be red. As soon as it has become green, battery
charger can be unplugged.
oPERAtIoN
Place the product on a solid and flat surface or tripod. Adjust the tilt of
the product by fine adjustment screws or position of tripod.
Turn on the product by pressing button
oN/oFF
. Red power
indicator will be on. Self-levelling indicator will flash green until the
product finishes self-levelling. As soon as self-levelling is finished
– indicator is steady green. Press buttons
V
1
,
V
2
,
H
to turn on/off
necessary laser planes. The laser lines flash if the product is out of the
range of automatic compensation (± 4°).
Press button to switch to pulse mode which allows working
with laser receiver.
oUt
DooR
