Operating Instructions
LASSTEC
Weighing System 0521
BAL0521-0001-EN
www.conductix.com
translated document
page 96 of 123
6.2.6
Configuration of the load display
If the config button is pressed, the following page will appear:
Information detail:
This page allows to configure the screen with the following parameter:
Display / hide the containers weight on the home page.
Display / hide the Twistlocks weight on the home page.
Display / hide the containers gravity centre on the home page.
Display / hide the containers eccentricities
Enable / Disable the buzzing sound on alarms.
Display / hide the telescopic position of the spreader.
Display / hide the overall weight (container 1+2) on the home page.
1)
Display / hide the overall stabilized weights (container 1+2) on the home page.
1)
Display / hide the spreader gravity centre on the home page.
1)
Display / hide the spreader eccentricities.
1)
Set the home page timer (10s to 120s; default: 60s).
Set the brightness of the screen.
Enable / Disable the automatic night mode (the brightness decrease to the night mode value when it becomes to be dark).
Set the night mode brightness value.
Activation of the Over Head Frame function (additional function).
2)
The OHF Container Manual Attached / OHF Container Auto Attached are future functions (not operative).
1)
= Only available with the twin-lift system.
2)
= Only operative with the single-lift system.
