Conductrix Wampfler ProfiDAT compact, Manual

19

System Components

Rail Components

Rail Connector

PE* Connector

Part No.: 051521-01

Rail connectors connect the ProfiDAT

®

compact

 rails to each other� They secure data as well as power transmission between the rails�

Please note:

 Screws are not included! For each segment (= rail segment supplied by one Access Point) one installation unit spare part kit (Part No�: 051590-01, see 

page 16) must be ordered, in which all required screws are included�

Scope of delivery PE connector:

• PE connector
• Screw nut
• Washers

Scope of delivery grounding cable:

• PE cable (length: 1 m, 2 m or 5 m)
• 2 cable lugs M8 (installed on both ends)

PE Connector M8 – Part No.: 051521-03
Grounding cable (incl. two cable lugs) – Config No.: 051522-01#

PE connectors are required for the PE rail function of ProfiDAT

®

compact

� They enable an electrical connection between the ProfiDAT

®

compact

 rail and the PE� Screw nuts 

as well as washers are included with the PE connector� PE cables with cable lugs need to be ordered seperately�
PE connectors are also used to ground the ProfiDAT

®

compact

 rail� The rail must be grounded according to the locally applicable regulation and standards, but at least 

on both ends of each rail segment with a 16 mm² cable� We recommend installing a PE connector after every 5

th

 rail� PE or grounding cables must suitable for operating 

temperatures of at least 90°C and colored in green and yellow�

Please note:

 Screws are not included! For each segment (= rail segment supplied by one Access Point) one installation unit spare part kit (Part No�: 051590-01, see 

page 16) must be ordered, in which all required screws are included�

Rail connector

PE Connector

Connector diameter

Grounding cable  

diameter 

Available  

cable lengths

M8

6 mm²

1 m / 2 m / 5 m

16 mm²
50 mm²
95 mm²

 22 

 100 

 30 

 50 

24

37

 22 

max. ø

21

54.5

37

 30 

 100 

 50 

25

* PE = Protective Earth (Grounding)