background image

- 15 -

08785150

Maintenance Chart

The  MAINTENANCE  CHART  lists  serviceable  items  on  this  compressor  package.    The  items  are  listed 
according to their frequency of maintenance.

Maintenance

INTERVAL

REQUIRED MAINTENANCE

EVERY 10 HOURS OR 

DAILY

1.  Check separator tank oil level.

2.  Check for fuel, oil, and air leaks.

3. Check compressor air filter maintenance indicator.  

4. Check battery hold down for security.

EVERY 50 HOURS OR 

WEEKLY

1.  Drain liquid from separator tank.  More frequent draining may be
required under high humidity conditions.

2.  Inspect lifting frame

3. Inspect Belts

4.    After  first  50  hours  install  Condux  P/N  02291801  50-Hour
Maintenance Kit.  Steps include changing oil and oil filter element.
Then follow yearly maintenance schedule.

EVERY 500 HOURS 

OR 1 YEAR

1.  Clean battery terminals

2.  Check battery hold-down and cables for wear

3. Check compressor air filter connections, fittings, and clamps.

4.  Check all door gaskets, hinges, and latches.

5.  Clean cooler fins on all coolers.

6. Check separator tank pressure relief valve.

7. Install Condux P/N 02291802 1-Year or 500-Hour Maintenance
Kit.  Steps include changing oil, oil filter element, air/oil coalescing
element, and air filter element. After this, regular intervals should
be used for changing oil and air filters.

Summary of Contents for Gulfstream 35






















Reviews: