52
11
TECHNICAL DATA
The following applies for all the models of the device:
/
The water to be filtered must conform to the European Drinking Water Regulations!
11.1
ACCESSORIES
/
Clear 2.0 Automatic controls retrofit kit
. For subsequent upgrade of the manual domestic water sta-
tion to an automatic domestic water station.
/
Clear 2.0 SAFE
. Central water monitoring system for installation between built-in rotary flange and
domestic water station. For monitoring the water consumption and shutting off the water pipe when
adjustable limits are exceeded. Protects against the effects of water pipe bursts, leakages, defects on
the domestic water installation and unusually high water consumption. Detects leaking taps and
valves.
Technical data
CLEAR 2.0 RD 1½"
CLEAR 2.0 RD 2"
Connection diameter nominal
DN 40
DN 50
Nominal flow rate according to DIN EN 1567
9.1 m³/h
14.0 m³/h
Backwashing volumetric flow
1)
1) Applies for a completely opened flushing water valve and 2 - 3 bar (
200 - 300 kPa
) mains pressure.
approx. 0,3 l/s
approx. 0,3 l/s
Nominal pressure
PN 16
PN 16
Operating pressure
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 16 bar
(150 - 1600 kPa)
Adjustable discharge pressure
Factory setting
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
Mesh size
lower mesh width
upper mesh width
0.1 mm (100
μ
m)
0.095 mm (95
μ
m)
0.125 mm (125
μ
m)
0.1 mm (100
μ
m)
0.095 mm (95
μ
m)
0.125 mm (125
μ
m)
Water and ambient temperature
max. 30 °C (86 °F)
max. 30 °C (86 °F)
Fitting length with screw connection
301 mm
335 mm
Fitting length w/o screw connection
160 mm
164 mm
Threaded connection according to
DIN EN 10226-1
DIN EN 10226-1
Weight
9.5 kg
11.0 kg
