3 Technical description
6
Installation manual
Conergy SunTop Trapeze
ENGLISH
3.3 Technical specifications
1 Not suitable for sandwich roofs.
2 After contacting Mounting Systems and a verification of the codes, thinner sheet metal thicknesses may be possible.
3 In case of a very low bead height (below 20 mm) a holder can be screwed on top of the trapezoidal sheet, alternative to the
trapezoidal side fixation, which is fixed laterally.
4 Depending on the location, building, selected fixing devices and the module type, other values may vary. With the SunTop Trapeze design tool,
you can calculate the permissible maximum values for any system quickly and easily.
5 Because of the expected thermal expansion due to temperature differences and the resulting stress on the rails, we recommend a
maximum length of 12 m per module row.
Application areas
Pitched roof – on-roof
Roof covering
Trapezoidal sheet metal
1
Min. sheet thickness
0,63 mm
2
Min. bead height
Free
3
Roof pitch
Up to 20°
4
Height of building
Up to 20 m
4
PV module
Framed
Module alignment
Portrait, landscape
Size of the module field
Free
5
Position of the module field
Free
Possible height leveling
Up to 5 mm
Distance between rail fixation
Depending on the load situation (automatic verification by the design software)
Standards
Eurocode 1 – DIN 1055 – Actions on structures
Eurocode 9 — Design of aluminum structures
Profiles
Extruded aluminum profiles (EN AW 6063 T66)
Rail fixation
Aluminum (EN AW 5754)
Small parts
Stainless steel (V2A)
Color
Aluminum, cold pressed
Summary of Contents for SunTop Trapeze
Page 1: ...Conergy SunTop Trapeze www conergy com Installation manual ...
Page 23: ......
